Recall 02V-055: 1992–1997 International Harvester FC, 1992–1997 International Harvester Fe and 1 more
INTERNATIONAL TRUCK AND ENGINE recall for service brakes, hydraulic, reported to NHTSA on Feb 15, 2002, covering about 2,678 vehicles.
The problem
On certain school buses, galvanic corrosion on the die cast adapter plate causes distortion of the wagon wheel seals that are mounted on the adapter plate. If the seals become distorted, the tipper valves cannot properly seat against the wagon wheel seals. If the tipper valves cannot seat completely, the fluid can back flow past the valves towards the reservoir and create a pressure loss for the front brakes, the rear brakes, or both.
The risk
This condition can result in an extended stopping distance without warning to the driver and the driver may feel the pedal fade or go completely to the floor, increasing the risk of a crash.
The fix
Dealers will inspect the vehicles and the master cylinders found to have the original die cast adapter plate design will be replaced. Owner notification began march 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Notes
Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-DOT (1-888-327-4236).
Recall details
| Manufacturer | INTERNATIONAL TRUCK AND ENGINE |
|---|---|
| Component | Service Brakes, Hydraulic › Foundation Components › Master Cylinder |
| Recall started by | the manufacturer |
| NHTSA campaign number | 02V055000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| International Harvester FC | 1992, 1993, 1994, 1995, 1996, 1997 | All years |
| International Harvester Fe | 1992, 1993, 1994, 1995, 1996, 1997 | All years |
| International Harvester RE | 1992, 1993, 1994, 1995, 1996, 1997 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 02V-055?
On certain school buses, galvanic corrosion on the die cast adapter plate causes distortion of the wagon wheel seals that are mounted on the adapter plate. If the seals become distorted, the tipper valves cannot properly seat against the wagon wheel seals. If the tipper valves cannot seat completely, the fluid can back flow past the valves towards the reservoir and create a pressure loss for the front brakes, the rear brakes, or both.
How is recall 02V-055 fixed?
Dealers will inspect the vehicles and the master cylinders found to have the original die cast adapter plate design will be replaced. Owner notification began march 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.