Recall 78V-130: 1978 Saab 99
SAAB CARS USA, INC. recall for vehicle speed control, reported to NHTSA on Jun 9, 1978, covering about 404 vehicles.
The problem
Insufficient clearance between the air/fuel mixing regulator and the throttle housing could allow the decel solenoid link arm on the throttle to contact the mixing regulator under certain extreme driving conditions. This would cause the engine to rock to the left on its mounting. Fully depressing the accelerator while making a sharp right turn at moderate to high speeds could cause such a contact to occur. Furthermore, movement of the throttle plate may momentarily be restricted during the time of contact between the link arm and mixing regulator.
The fix
The dealer will replace the link arm with a modified one to ensure sufficient clearance to the mixing regulator under all driving conditions. The position of the decel solenoid may also be readjusted if found necessary.
Notes
Vehicle description: passenger vehicles.system: fuel; throttle linkage.consequences of defect: throttle linkage interference may prevent the throttlefrom returning to the idle position. Loss of vehicle speed control and anaccident could result.
Recall details
| Manufacturer | SAAB CARS USA, INC. |
|---|---|
| Component | Vehicle Speed Control |
| Recall started by | the manufacturer |
| NHTSA campaign number | 78V130000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Saab 99 | 1978 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 78V-130?
Insufficient clearance between the air/fuel mixing regulator and the throttle housing could allow the decel solenoid link arm on the throttle to contact the mixing regulator under certain extreme driving conditions. This would cause the engine to rock to the left on its mounting. Fully depressing the accelerator while making a sharp right turn at moderate to high speeds could cause such a contact to occur. Furthermore, movement of the throttle plate may momentarily be restricted during the time of contact between the link arm and mixing regulator.
How is recall 78V-130 fixed?
The dealer will replace the link arm with a modified one to ensure sufficient clearance to the mixing regulator under all driving conditions. The position of the decel solenoid may also be readjusted if found necessary.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.