Recall 80V-070: 1980 Harley-Davidson 1340
HARLEY-DAVIDSON MOTOR CO. recall for steering, reported to NHTSA on May 29, 1980, covering about 3,860 vehicles.
The problem
The adjusting screw, which mounts through a fork lock lever assembly into the fork lock itself, may not be fully and securely engaged because the screw may not be long enough. This may allow the fork pin to drop and accidentally engage the fork lock.
The fix
Dealer will install an adjusting screw kit free of charge.
Notes
Vehicle description: motorcycles.system: electrical; ignition switch; fork lock assembly.consequences of defect: the fork lock could be engaged, causing loss of vehiclecontrol, without prior warning, and an accident.note: the defect is likely to occur during extreme left hand turns at lowspeeds when the handlebar must be physically rotated to its left stop.
Recall details
| Manufacturer | HARLEY-DAVIDSON MOTOR CO. |
|---|---|
| Component | Steering › Column Locking › Anti-Theft Device |
| Recall started by | the manufacturer |
| NHTSA campaign number | 80V070000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Harley-Davidson 1340 | 1980 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 80V-070?
The adjusting screw, which mounts through a fork lock lever assembly into the fork lock itself, may not be fully and securely engaged because the screw may not be long enough. This may allow the fork pin to drop and accidentally engage the fork lock.
How is recall 80V-070 fixed?
Dealer will install an adjusting screw kit free of charge.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.