Recall 80V-073: 1973–1977 Dodge B300, 1973–1977 Dodge CB300 and 8 more
CHRYSLER CORPORATION recall for service brakes, hydraulic, reported to NHTSA on Jun 11, 1980, covering about 350,000 vehicles.
The problem
Due to a combination of disc brake pad wear and turn stop wear on certain vehicles, there may be an increase in brake pedal travel and a reduction in front braking effectiveness following a full turn. Also, a frame crack could develop and could extend through all or most of the rail section.
The fix
Upon inspection dealer will replace either the left or right turn stop bracket to correct the front brakes. If frame is cracked it will be welded and a rod reinforcement will be installed over the cracked area.
Notes
Vehicle description: light trucks.system: service brakes; front wheel disc brakes, structure; front frame railextension.consequences of defect: the reduction in front wheel braking effectivenesscould result in a vehicle accident in situations which require minimum stoppingdistance. If an extensive crack develops in the frame rail, increased steeringsystem play and difficulty in handling of vehicle could also lead to anaccident.note: a crack in the frame may be accompanied by a metallic rattling noise asthe two edges scrape against each other.
Recall details
| Manufacturer | CHRYSLER CORPORATION |
|---|---|
| Component | Service Brakes, Hydraulic › Foundation Components › Disc › Caliper |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 80V073000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Dodge B300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Dodge CB300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Dodge CB400 | 1973, 1974, 1975, 1976, 1977 | All years |
| Dodge MB300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Dodge MB400 | 1973, 1974, 1975, 1976, 1977 | All years |
| Plymouth B300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Plymouth CB300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Plymouth CB400 | 1973, 1974, 1975, 1976, 1977 | All years |
| Plymouth MB300 | 1973, 1974, 1975, 1976, 1977 | All years |
| Plymouth MB400 | 1973, 1974, 1975, 1976, 1977 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 80V-073?
Due to a combination of disc brake pad wear and turn stop wear on certain vehicles, there may be an increase in brake pedal travel and a reduction in front braking effectiveness following a full turn. Also, a frame crack could develop and could extend through all or most of the rail section.
How is recall 80V-073 fixed?
Upon inspection dealer will replace either the left or right turn stop bracket to correct the front brakes. If frame is cracked it will be welded and a rod reinforcement will be installed over the cracked area.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.