Recall 91V-148: 1990 Winnebago CW822FT, 1990 Winnebago CW822FW and 2 more
WINNEBAGO IND., INC. recall for wheels, reported to NHTSA on Sep 17, 1991, covering about 160 vehicles.
The problem
Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.
The risk
Vehicle stability may be impaired under certain roador operating conditions which may cause loss of vehicle control.
The fix
Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.
Notes
System: rear wheel assembly.vehicle description: commercial trucks.
Recall details
| Manufacturer | WINNEBAGO IND., INC. |
|---|---|
| Component | Wheels |
| Recall started by | the manufacturer |
| NHTSA campaign number | 91V148000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Winnebago CW822FT | 1990 | All years |
| Winnebago CW822FW | 1990 | All years |
| Winnebago CW825FT | 1990 | All years |
| Winnebago CW825FW | 1990 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 91V-148?
Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.
How is recall 91V-148 fixed?
Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.