Recall 91V-212: 1984–1989 Raco Utility Trailer KIT
OLD H.G., INC. recall for unknown or other, reported to NHTSA on Dec 6, 1991, covering about 24,651 vehicles.
The problem
The bolt holding the tongue to the first cross brace "u" member may pull through because of an improperly sized hole in the crossmember.
The risk
An improperly sized bolt hole would reduce the clampingforce between the tongue and crossmember, allowing the tongue to pivot betweenthe ball hitch and the second cross brace. This could result in the trailerjackknifing, and loss of control of the trailer.
The fix
Install a flatwasher in the outsized bolt hole to increase the clamp force between the tongue and first crossmember.
Notes
System: trailer tongue.vehicle description: utility trailers.
Recall details
| Manufacturer | OLD H.G., INC. |
|---|---|
| Component | Unknown or Other |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 91V212000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Raco Utility Trailer KIT | 1984, 1985, 1986, 1987, 1988, 1989 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 91V-212?
The bolt holding the tongue to the first cross brace "u" member may pull through because of an improperly sized hole in the crossmember.
How is recall 91V-212 fixed?
Install a flatwasher in the outsized bolt hole to increase the clamp force between the tongue and first crossmember.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.