Recall 92V-026: 1991 Ford F-250, 1991 Ford F-350 and 2 more
FORD MOTOR COMPANY recall for service brakes, hydraulic, reported to NHTSA on Mar 3, 1992, covering about 467,000 vehicles.
The problem
A revised brake lining noise insulator resulted in a decrease in the thermal insulation between the brake lining and the front brake caliper piston. This caused greater heat transfer to the caliper pistons with the potential to overheat the brake fluid and diminish brake effectiveness during severe braking conditions.
The risk
Increased stopping distances and inablility to holdvehicles on a steep grade results in increased risk of accident in the event ofa sudden stop or when constant braking is needed to maneuver through areas withsteep grades.
The fix
Add snap-in insulators that attach to each of the front brake caliper pistons. In addition, vehicles with 7.5 l engines will have insulation added to the engine compartment brake lines.
Notes
System: brakes; front brake lining.vehicle description: f250 and f350 trucks with 7.3 l diesel and 7.5 l efiengines ; f250 and f350 4x4 models with 5.8 l efi engines.note: ford recommends vehicle operators do not exceed the gcwr and gvwr of theirvehicles, and proper maintenance of the brakes on these vehicles and any trailerparticularly when operating in mountainous areas with long, steep grades.
Recall details
| Manufacturer | FORD MOTOR COMPANY |
|---|---|
| Component | Service Brakes, Hydraulic › Foundation Components › Drum › Shoes/Linings |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 92V026000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Ford F-250 | 1991 | All years |
| Ford F-350 | 1991 | All years |
| Ford F250 | 1988, 1989, 1990 | All years |
| Ford F350 | 1988, 1989, 1990 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 92V-026?
A revised brake lining noise insulator resulted in a decrease in the thermal insulation between the brake lining and the front brake caliper piston. This caused greater heat transfer to the caliper pistons with the potential to overheat the brake fluid and diminish brake effectiveness during severe braking conditions.
How is recall 92V-026 fixed?
Add snap-in insulators that attach to each of the front brake caliper pistons. In addition, vehicles with 7.5 l engines will have insulation added to the engine compartment brake lines.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.