Recall 94V-020: 1992–1993 MCI 102A3, 1991–1993 MCI 102B3 and 6 more
MOTOR COACH IND., INC. recall for service brakes, air, reported to NHTSA on Feb 4, 1994, covering about 1,333 vehicles.
The problem
The brake rod to brake arm attaching nut and bolt are undertorqued and may loosen and fall off causing separation of the rod and arm.
The risk
Separation of the brake rod and the brake arm results in the total loss of the service brakes which may result in an accident.
The fix
Mci will supply 1/2" unf "stover" locknut to customers. This locknut should be installed immediately and torqued to 40 lb/FT (54 nm). A fastener will also be provided to the customer along with the installation procedures.
Notes
System: brakes; air systems.vehicle description: buses and motor coaches.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge or the remedy does not correct the defect or noncompliance, pleasecontact mci service at 1-204-453-2872. Also, contact the national highway highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | MOTOR COACH IND., INC. |
|---|---|
| Component | Service Brakes, Air |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 94V020000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| MCI 102A3 | 1992, 1993 | All years |
| MCI 102B3 | 1991, 1992, 1993 | All years |
| MCI 102C3 | 1991, 1992, 1993 | All years |
| MCI 102D3 | 1991, 1992, 1993 | All years |
| MCI 102DL3 | 1991, 1992, 1993 | All years |
| MCI 96B3 | 1991, 1992, 1993 | All years |
| MCI MC12 | 1991, 1992, 1993 | All years |
| MCI MC9 | 1991, 1992, 1993 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 94V-020?
The brake rod to brake arm attaching nut and bolt are undertorqued and may loosen and fall off causing separation of the rod and arm.
How is recall 94V-020 fixed?
Mci will supply 1/2" unf "stover" locknut to customers. This locknut should be installed immediately and torqued to 40 lb/FT (54 nm). A fastener will also be provided to the customer along with the installation procedures.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.