Recall 94V-108: 1993 Saab 9000
SAAB CARS USA, INC. recall for exterior lighting, reported to NHTSA on Jun 9, 1994, covering about 9,747 vehicles.
The problem
A number of brake light switches have an oval-shaped piston which can get stuck under certain conditions. Other switches were mounted so that both locking tabs are not completely engaged in the mounting bracket. If one side is not engaged, the switch is misaligned with the pedal mechanism and can bind the piston movement, which can cause the brake light switch to stick in the "off" or "on" position.
The risk
This results in either the brake lights remaining on constantly or the brake lights not illuminating when the brakes are applied. This results in inaccurate signals of brake operation to other vehicle operators, and could result in an accident.
The fix
Dealers will inspect brake light switches. For vehicles with the oval-shaped piston and for vehicles with misaligned brake light switches, the brake light switch will be replaced.
Notes
System: lighting; switch; button; ring; brake lights.vehicle description: passenger vehicles.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge or the remedy does not correct the defect or noncompliance, please contact saab service center at 1-800-955-9007. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | SAAB CARS USA, INC. |
|---|---|
| Component | Exterior Lighting › Brake Lights › Switch |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 94V108000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Saab 9000 | 1993 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 94V-108?
A number of brake light switches have an oval-shaped piston which can get stuck under certain conditions. Other switches were mounted so that both locking tabs are not completely engaged in the mounting bracket. If one side is not engaged, the switch is misaligned with the pedal mechanism and can bind the piston movement, which can cause the brake light switch to stick in the "off" or "on" position.
How is recall 94V-108 fixed?
Dealers will inspect brake light switches. For vehicles with the oval-shaped piston and for vehicles with misaligned brake light switches, the brake light switch will be replaced.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.