Recall 94V-118: 1988–1993 Ford B600, 1988–1993 Ford B700
FORD MOTOR COMPANY recall for steering, reported to NHTSA on Jun 27, 1994, covering about 12,700 vehicles.
The problem
The steering gears have an improperly machined snap ring groove. This can cause a fracture of the snap ring with subsequent damage to the recirculating ball guide tube. Also, the o-ring seal in vehicles built after february 1988 does not meet specifications and is inadequate, causing interior leakage around the o-ring / glide ring seal in the steering gear.
The risk
The fracture of the snap ring results in increasing deterioration of the ability to turn the vehicle to the right. The driver would experience increased steering efforts or a "crunchy" feeling at the steering wheel. The inadequate o-ring seal causes momentary reductions in power steering assist at low speed and certain left turn maneuvers. Both conditions result in decreased steering ability.
The fix
Dealers will rebuild the steering gear. If a broken snap ring is found during rebuilding, the steering gear will be replaced with a remanufactured unit.
Notes
System: steering: gear: rack and pinion.vehicle description: school bus chassis.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and freeof charge or the remedy does not correct the defect or noncompliance, please contact the ford service center at 1-800-392-3673. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | FORD MOTOR COMPANY |
|---|---|
| Component | Steering › Rack and Pinion |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 94V118000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Ford B600 | 1988, 1989, 1990, 1991, 1992, 1993 | All years |
| Ford B700 | 1988, 1989, 1990, 1991, 1992, 1993 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 94V-118?
The steering gears have an improperly machined snap ring groove. This can cause a fracture of the snap ring with subsequent damage to the recirculating ball guide tube. Also, the o-ring seal in vehicles built after february 1988 does not meet specifications and is inadequate, causing interior leakage around the o-ring / glide ring seal in the steering gear.
How is recall 94V-118 fixed?
Dealers will rebuild the steering gear. If a broken snap ring is found during rebuilding, the steering gear will be replaced with a remanufactured unit.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.