Recall 94V-151: 1993–1994 BMW 325, 1995 BMW M3
BAYERISCHE MOTOREN WERKE recall for seat belts, reported to NHTSA on Aug 10, 1994, covering about 57,000 vehicles.
The problem
In a FMVSS no. 208 30 miles-per-hour compliance test, an unbelted test driver dummy's chest maximum resultant acceleration was 70.8 g's, which exceeds the maximum allowable value of 60 g's. Also, the unbelted passenger dummy's left femur maximum load was 2361 lbs, which exceeds maximum allowable value of 2250 lbs. The vehicles do not comply with FMVSS no. 208, "occupant crash protection."
The risk
Consequence of non-compliance: in the event of an accident, the occupant will be subjected to an increased risk of injury.
The fix
On automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. Also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. The steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. A brace will be added between the knee bolster support and the steering column.
Notes
System: interior systems; passive restraints; air bag; driver; FMVSS n0. 208.vehicle description: passenger cars, models 325i, 325ia, 325is, 325sa, and m3.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the noncompliance, please contact bmw service center at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | BAYERISCHE MOTOREN WERKE |
|---|---|
| Component | Seat Belts › Front › Anchorage |
| Recall started by | NHTSA (Office of Vehicle Safety Compliance) |
| NHTSA campaign number | 94V151000 |
Vehicles in this recall
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 94V-151?
In a FMVSS no. 208 30 miles-per-hour compliance test, an unbelted test driver dummy's chest maximum resultant acceleration was 70.8 g's, which exceeds the maximum allowable value of 60 g's. Also, the unbelted passenger dummy's left femur maximum load was 2361 lbs, which exceeds maximum allowable value of 2250 lbs. The vehicles do not comply with FMVSS no. 208, "occupant crash protection."
How is recall 94V-151 fixed?
On automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. Also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. The steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. A brace will be added between the knee bolster support and the steering column.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.