Recall 94V-214: 1994 Thomas School Bus
THOMAS BUILT BUSES, INC. recall for latches/locks/linkages, reported to NHTSA on Nov 1, 1994, covering about 1,458 vehicles.
The problem
The hole in the bolt portion of the vandalock was drilled in an incorrect location, allowing the pin to be inserted with the bolt in the locked position while bypassing the starter interlock. This can result in the engine starting system operating while the emergency exit door is locked. This does not meet the requirements of FMVSS no. 217, "bus window release and retention."
The risk
Consequence of non-compliance: vehicles operated while emergency exits are locked result in increased risk of passenger entrapment when involved in an accident.
The fix
Dealers will rivet a metal shield to the vandalock cover to prevent pin insertion in the event that the pin hole has been incorrectly located.
Notes
System: structure; door assembly; latches and locks.vehicle description: school buses equipped with "vandalock" systems at the emergency exit doors.note: if the vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the noncompliance, please contact thomas built at 1-910-889-4871. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | THOMAS BUILT BUSES, INC. |
|---|---|
| Component | Latches/Locks/Linkages › Doors › Latch |
| Recall started by | the manufacturer |
| NHTSA campaign number | 94V214000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Thomas School Bus | 1994 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 94V-214?
The hole in the bolt portion of the vandalock was drilled in an incorrect location, allowing the pin to be inserted with the bolt in the locked position while bypassing the starter interlock. This can result in the engine starting system operating while the emergency exit door is locked. This does not meet the requirements of FMVSS no. 217, "bus window release and retention."
How is recall 94V-214 fixed?
Dealers will rivet a metal shield to the vandalock cover to prevent pin insertion in the event that the pin hole has been incorrectly located.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.