Recall 95V-103: 1988 Subaru DL, 1988 Subaru GL and 2 more
SUBARU OF AMERICA, INC. recall for seat belts, reported to NHTSA on May 24, 1995, covering about 100,825 vehicles.
The problem
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
The risk
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
The fix
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
Notes
System: interior; seat belts; belt buckles.vehicle description: passenger vehicles equipped with safety belts made by takata corporation. Dl, gl and loyale models involve only 3-door coupes, other models in these series are not involved.note: the manufacturer has not supplied the model vehicles included in this campaign.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, please contact subaru at 1-800-782-2783. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | SUBARU OF AMERICA, INC. |
|---|---|
| Component | Seat Belts › Front › Buckle Assembly |
| Recall started by | NHTSA (Office of Defects Investigation) |
| NHTSA campaign number | 95V103006 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| Subaru DL | 1988 | All years |
| Subaru GL | 1988 | All years |
| Subaru Justy | 1987, 1988, 1989, 1990, 1991 | All years |
| Subaru Loyale | 1990 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 95V-103?
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
How is recall 95V-103 fixed?
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.