Recall 96V-233: 1996–1997 International Harvester 2574, 1997 International Harvester 2654 and 11 more
INTERNATIONAL TRUCK AND ENGINE recall for suspension, reported to NHTSA on Nov 22, 1996, covering about 1,133 vehicles.
The problem
The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted. The length of the keyway slot may not be long enough to accommodate the tab causing the tab to be deformed or damaged during installation.
The risk
This locking tab prevents the wheel bearing nut from loosening during vehicle operation. If this tab is deformed, the nut can loosen allowing the wheel to separate from the axle increasing the risk of a vehicle accident.
The fix
Dealers will replace the drive axle housing nuts with a conventional wheel nut hardware system.
Notes
Owner notification:owner notification began december 10, 1996. Note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact navistar at 1-800-448-7825.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | INTERNATIONAL TRUCK AND ENGINE |
|---|---|
| Component | Suspension › Rear |
| Recall started by | the manufacturer |
| NHTSA campaign number | 96V233002 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| International Harvester 2574 | 1996, 1997 | All years |
| International Harvester 2654 | 1997 | All years |
| International Harvester 2674 | 1997 | All years |
| International Harvester 4700 | 1997 | All years |
| International Harvester 4800 | 1997 | All years |
| International Harvester 4900 | 1997 | All years |
| International Harvester 5000 | 1997 | All years |
| International Harvester 8100 | 1997 | All years |
| International Harvester 8200 | 1997 | All years |
| International Harvester 9200 | 1997 | All years |
| International Harvester 9300 | 1997 | All years |
| International Harvester 9400 | 1997 | All years |
| International Harvester 9800 | 1997 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 96V-233?
The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted. The length of the keyway slot may not be long enough to accommodate the tab causing the tab to be deformed or damaged during installation.
How is recall 96V-233 fixed?
Dealers will replace the drive axle housing nuts with a conventional wheel nut hardware system.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.