Recall 96V-239: 1996–1997 International Harvester 3800
INTERNATIONAL TRUCK AND ENGINE recall for vehicle speed control, reported to NHTSA on Nov 27, 1996, covering about 727 vehicles.
The problem
Vehicle description: school buses equipped with the international i6 electronic engine and an extra thick bus body floor. The accelerator pedal to floor clearance is approximately 1.2 inches with a standard bus body floor. However, some customers ordered an additional 3/4 inch thick floor and extra thick floor mats to serve as insulation in cold climates. When this extra flooring is used, the bottom edge of the accelerator pedal, when depressed, can come in contact with the floor.
The risk
Should the accelerator pedal contact the floor, the pedal could get caught and not return to the idle position increasing the risk of a vehicle accident.
The fix
Dealers will inspect the flooring on these buses to insure there is a minimum of 1/4 inch clearance. On buses with less than 1/4 inch clearance, the dealer will remove the pedal and cut off the bottom of the pad to obtain the proper clearance.
Notes
Owner notification:owner notification will begin december 20, 1996. Note:owners who take their buses to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact navistar at 1-800-448-7825.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
Recall details
| Manufacturer | INTERNATIONAL TRUCK AND ENGINE |
|---|---|
| Component | Vehicle Speed Control › Accelerator Pedal |
| Recall started by | the manufacturer |
| NHTSA campaign number | 96V239000 |
Vehicles in this recall
| Vehicle | Model years | |
|---|---|---|
| International Harvester 3800 | 1996, 1997 | All years |
Not every vehicle of these model years is included. Enter your VIN at nhtsa.gov/recalls ↗ or ask a dealer.
Frequently asked questions
What is recall 96V-239?
Vehicle description: school buses equipped with the international i6 electronic engine and an extra thick bus body floor. The accelerator pedal to floor clearance is approximately 1.2 inches with a standard bus body floor. However, some customers ordered an additional 3/4 inch thick floor and extra thick floor mats to serve as insulation in cold climates. When this extra flooring is used, the bottom edge of the accelerator pedal, when depressed, can come in contact with the floor.
How is recall 96V-239 fixed?
Dealers will inspect the flooring on these buses to insure there is a minimum of 1/4 inch clearance. On buses with less than 1/4 inch clearance, the dealer will remove the pedal and cut off the bottom of the pad to obtain the proper clearance.
Is the recall repair free?
Yes. Safety recall repairs are free at authorized dealers. Check whether your vehicle is included with its VIN at nhtsa.gov/recalls.