2020 Kenworth T680 recalls and problems

The 2020 Kenworth T680 has 7 safety recalls and 8 owner complaints filed with NHTSA. Recall repairs are free at any Kenworth dealer.

Recalls
7
Complaints
8
Crashes / fires
0 / 0
Injuries / deaths
0 / 0

Recalls may cover only some 2020 Kenworth T680 vehicles. Check your VIN at NHTSA ↗ to see open recalls for your exact car.

2020 Kenworth T680 recalls

Recall 24V-145: Service Brakes, Air

Reported Feb 23, 2024 · 936 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.

Fix: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

Recall 22V-277: Steering

Reported Apr 25, 2022 · 17,641 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.

Risk: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

Fix: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

Recall 20V-593: Service Brakes, Air

Reported Sep 28, 2020 · 1,416 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

Risk: Longer than expected service-brake release timing may lengthen vehicle stopping distance, increasing the risk of a crash.

Fix: PACCAR will notify owners, and dealers will replace the standard rear-brake, ABS modulator valve with a quick release valve, free of charge. The recall began November 30, 2020. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWD.

Recall 20V-199: Service Brakes, Air, Electronic Stability Control (ESC)

Reported Apr 6, 2020 · 460,515 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Fix: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Recall 19V-340: Visibility

Reported May 1, 2019 · 3,907 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2020 Peterbilt 520 and 579 vehicles and Kenworth T680, T880 and W990 vehicles. The mirror glass may detach from the mirror carrier plate due to inadequate adhesion.

Risk: If the mirror glass detaches, the driver may have reduced visibility and the mirror glass will become a road hazard that may strike another vehicle or pedestrian, increasing the risk of a crash or injury.

Fix: PACCAR has notified owners, and dealers will inspect the upper mirror glass/mirror carrier, replacing it as necessary, free of charge. The recall began May 31, 2019. Kenworth owners may contact PACCAR customer service at 1-425-828-5888 and Peterbilt owners may call 1-940-591-4220. PACCAR's numbers for this recall is 19KWC and 19PBC.

Recall 19V-275: Parking Brake

Reported Apr 5, 2019 · 1,837 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving unexpectedly.

Risk: Unexpected vehicle movement may increase the risk of a crash or injury.

Fix: PACCAR will notify owners and dealers will replace the park brake pressure switch, free of charge. PACCAR issued owners and interim notification on June 3, 2019. The recall began August 6, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 19KWB.

Recall 19V-176: Suspension

Reported Mar 5, 2019 · 93 vehicles affected · PACCAR Incorporated

Problem: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T680, T800, T880, W900 and W990 trucks. The rear axles may not contain oil.

Risk: Without lubricating oil, the bearings, hub and axle shafts may wear, resulting in the separation of a wheel end from the axle, increasing the risk of a crash.

Fix: Paccar will notify owners, and Kenworth dealers will inspect all of the rear axles for the presence of oil. If no oil is present, the wheels ends will be removed and the bearings, hub and axle shaft will be inspected for damage. If excessive wear or heat damage is evident, the components will be replaced, as necessary. Oil will then be added per the axle specifications. These repairs will be performed free of charge. The recall began April 16, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. Paccar's number for this recall is 19KWA.

2020 Kenworth T680 problems reported by owners

Problem areaReports
Power Train5
Service Brakes2
Forward Collision Avoidance2
Vehicle Speed Control1
Unknown or Other1

Most reported parts

  • Forward Collision Avoidance › Adaptive Cruise Control — 1
  • Forward Collision Avoidance › Warnings — 1

Typical mileage at the time of the problem: 47,000 miles (median of owner reports).

Problems that are not covered by a recall are paid repairs; labor rates follow local mechanic pay — see what auto mechanics earn in each state.

Recent 2020 Kenworth T680 complaints

Owner reports filed with NHTSA, as written (personal details removed). Complaints are not verified by NHTSA.

Power Train · reported Dec 8, 2024
Right-hand shift stalk between the shifter and the transmission is causing the vehicle to become disabled while stopped and unable to go from forward to reverse. Also getting SPN 639 pop-up when communication has been lost between the engine control module (ECM) and SAE J1939 data link. The check engine light illuminates, and the ECM immediately logs the fault code. Have to depress brake pedal while stopped & cycle gear selector to get fault to clear to start engine . Message also displayed Transmission Fault Repair Required Find Service Center . Also had new spring clutch replaced in May of…
Power Train · reported Dec 4, 2024
The clutch Spring on these trucks have been failing heavily. We have a couple more of these trucks and they all have the same issue. the housing for the clutch springs are cracked or damaged at less than 500,000 miles on a heavy duty truck. These clutches are supposed to last over 1MM miles. Its not a coincidence that every truck we have is failing at the same mileage. These clutches are made defective from the manufacturer. Its also a coincidence that the replacement clutches are not the original design and are of a newer design and brand. THIS is RED FLAGS!!!!
Power Train · reported Sep 30, 2024
My circumstances are EXACTLY as described in a release 12/19/2019 Tech Service Bulletin A002 I experienced the vibration in my steering wheel that caused me to be suspect that there was something wrong in the drive train. Upon further investigation. I noticed that an oil seal was leaking, and when I dug a little deeper, I noticed gears that were broken and shaved down and then stopped at a Kenworth corporate location upon which they told me that I needed to purchase the entire unit to fix it. I then decided that I was going to add some differential oil and drive at a speed of 45 miles an hour…
Power Train · reported Jul 26, 2024
Throw out bearing failed prematurely. Truck only has 491,000 miles and has had a catastrophic failure resulting in a $29,000 repair bill. I have 4 other trucks like this and they are all showing signs of the same thing.
Unknown or Other · reported Mar 18, 2024
When driving, the truck will not go into gear. For example, if I am trying to shift gears in the automatic, it will stay in that gear. When traveling down the highway, it stays in a gear. I have to find a safe place to pull over and put it in neutral, then proceed. I have already changed the right hand stalk once before and it didnt go into reverse, that was the reason for changing it. I get codes saying that it needs to ve changed again and it was just recently put on.

Other Kenworth T680 years

Compare all Kenworth T680 years · All Kenworth models

Frequently asked questions

Does the 2020 Kenworth T680 have any recalls?

Yes — NHTSA lists 7 recalls for the 2020 Kenworth T680: 24V-145 (service brakes, air), 22V-277 (steering), 20V-593 (service brakes, air), 20V-199 (service brakes, air, electronic stability control (esc)), 19V-340 (visibility) and more. Not every vehicle is affected, so check your VIN at nhtsa.gov/recalls.

What is the most common problem with the 2020 Kenworth T680?

Owners report power train problems most often (5 reports), followed by service brakes (2). The typical mileage when problems were reported is about 47,000 miles.

Are Kenworth recall repairs free?

Yes. Safety recall repairs are free at authorized Kenworth dealers, whether you are the first owner or bought the car used.